一、适用
◇牛仔，棉，丝光棉，涤纶布，化纤布等织物的裂纹印花效果。
二、外观及组成
◇白色稠状物/乳白膏状物
◇由高分子聚氨酯及特殊助剂复合而成
◇固体含量55%±1
◇PH值：7-8
◇布氏粘度：120000-140000CPS
三、产品特性
◇本系列产品印花吹干后会出现自然的龟裂纹肌理效果，浆体表面细腻、平滑、手感偏硬、耐水洗。属环保型胶浆。
四、操作工艺参考
◇龟裂打底浆打底→印龟裂浆→吹干或自然干爆裂→起布→压烫过热→成品
◇做牛仔水洗龟裂打底浆添加2%-3%牛仔浆助剂，龟裂浆中添加0.5%-1.5%牛仔浆助剂（注意龟裂浆不能添加过多牛仔浆助剂，水洗牢度不严重的情况下尽量不要添加牛仔浆助剂，会影响龟裂的效果）。起布后用烫压机压烫。（120-160度压烫10秒）
五、注意事项
◇裂纹的大小与多少和印出来的浆层厚薄有关，浆层越薄它的裂纹就越细，反之它的裂纹越粗。
◇特别强调，龟裂浆一定要用龟裂打底浆打底，否则易脱落且没有弹力。
◇开盖使用后注意密封保存，以免粉化或变质，应贮存在密封的溶器内，避免冷冻及高温，在阴凉干燥的环境中，贮存期12个月。

Other detailed information

一．Substrates

Denim ,cotton,mercerized cotton, polyester cloth and chemical fabric.

二．Appearance and composition

White viscous body/Ivory paste

Polymer polyurethane and special auxiliaries

Solid content:55%±1

PH value:7-8

Brinell viscosity:120000-140000CPS

三．Product features

This product will appear natural crack effect after drying, has stain finish, the hand feel maybe a little hard,resistance to wash and belongs to environmental paste.

四．Operation reference

Crack base as render→print crack base→drying or natural drying→left fabric→heat pressure→finished product

Making denim washable crack base add 2%-3%denim auxiliaries, add 0.5%-1.5%denim auxiliaries into crack base（you should note that do not add too much denim auxiliaries into crack base,the ability of wash do not serious,you maybe do not need to add denim auxiliaries , or that will affect the result of cracking），after left the fabric you should use heat pressure to press.(at temperature of 120-160℃ for 10 seconds.)

五．Notes

The size and amount of cracking is related to the thickness of paste layer，the thinner of paste layer, the finer of cracking, otherwise the cracking is coarser.

Emphasized ：crack paste must use crack base as render, otherwise,it is easy to come off and without elasticity.

After using, the product should stored in airtight condition, in order to prevent pulverization or deterioration, It should be stored in an airtight container, avoid freezing or high temperature,the shelf life is 12 months in a shadowy environment.