一、主要用途

适用于棉织品，毛衣或其他要求浆料印在织布上无手感的印花效果，乳液稳定性良好，重复印率高，清洗方便，印花后织物有良好的皂洗性。

二、性状

1、外观：乳白色糊状。

2、离子性：阴离子。

3、粘度：110000-130000CPS。

4、组成：特殊共聚物。

5、PH值：7.0-8..0

6、贮存常用温,密闭一年。

三、特性

G50-2高遮盖白浆：稳定性良好，精细光滑，纹理清晰，接近拔印效果，无味，透气性好，能在深色布上进行彩色印花的高遮盖水浆

G51-2仿彩浆：稳定性良好，手感超柔软，精细光滑，纹理清晰，接近拔印效果，无味，透气性好，能在深色布上进行彩色印花的高遮盖水浆

G51-3超柔软拔透：稳定性良好，手感超柔软，得色率高，精细光滑，纹理清晰，接近拔印效果，无味，透气性好，能在深色布上进行彩色印花的高遮盖水浆

四、印花工艺

本品选用100-120目丝网，一般印2次2刀即可。

印花-干燥-热处理：130°C-150°C过热1-5分钟，如需要调色，直接用彩印浆+白浆调入色种5%以内。

五、注意事项：

1）如印制深色易掉色的布料，必须要检验颜色是否回升华到浆料表面，以免造成不必要的损失。

2）由于印花面料的多样化，和一些外在的不确定因素做大货之前先小样实验确定以后方可批量生产。未确定情况使用或操作不当引起的质量问题本公司概不负责

Other detailed information

一．Main usage

It is suitable for cotton fabrics,wool or other require the paste prints on fabrics with no hand feel printing effect, emulsion has good stability,good ability of reprinting,easy to clean,after printing, the cotton fabric has good soaping performance.

二．Characters

1.Appearance : milky white paste

2.Ionic: anion

3.Viscosity:110000-130000CPS

4.Composition:special polymer

5.PH Value:7.0-8.0

6.Store at room temperature,airtight for one year.

三．Features

G50-2 high covering white pulp：Good stability,fine and smooth,clear textures,close to discharge print effect,odorless,good permeability,which is a high covering slurry that can be printed on dark cloth.

G51-2 imitated colored pulp：Goodstability,super soft hand feel,fine and smooth,clear textures,close to discharge print effect,odorless,good permeability,which is a high covering slurry that can be printed on dark cloth.

G51-3 super soft discharge clear pulp：Good stability,super soft hand feel,good color yield rate,fine and smooth,clear textures,close to discharge print effect,odorless,good permeability,which is a high covering slurry that can be printed on dark cloth.

四．Printing technology

This product chooses 100-120mesh silk screen, print two times and scrape two times as usual.

Printing-drying-heat pressure:Over flashing1-5minutes at 130-150℃，if need adjust color,using discharge like color+white paste within 5% pigment.

五．Notes:

1)If print on dark fabric which is easy to fade,must have a test that the color whether sublimate on surface of paste, in order to cause unnecessary losses.

2)Due to variety of printing fabric and some uncertain factors outdoor,must have a test before in a batch production.Our company is not responsible for quality problem which caused by wrong operation or using under uncertain condition.