一.适用:
泳衣高弹布,莱卡布,牛仔布。
二、外观组成及说明:
外观及组成:白色(半透明)状粘稠体,聚氨酯聚合物
布氏粘度:120000~140000CPS
PH值:7.0±0.5
固体含量:45%±1
三、特性
弹性好、遮盖力好、牢度好、耐水洗、易过网,高附着力,手感特柔软,耐高温蒸煮。耐黄变.常温下保存12个月,(避免45℃以上高温或-25℃以下低温)低温耐折型,免过热型,高附着力。属于环保型。(双组份)
PU230A高弹水性墨白(双组份):遮盖力好,牢度好,弹性好,手感中软,易过网,高附着力,耐黄变,超低温耐折型,抗回粘性能优,防冻,用于转印烫画与彩印结合力强以及耐水洗超强
PU230B高弹水性墨透(双组份):高透明,得色率好,牢度好,弹性好,手感中软,易过网,高附着力,耐黄变,超低温耐折型,抗回粘性能优,防冻
四、参考配方
调深色 |
调浅色 |
||
弹性水性墨白 |
20% |
弹性水性墨白 |
40% |
弹性水性墨透 |
80% |
弹性水性墨透 |
60% |
色浆 |
3-5% |
色浆 |
3-5% |
1008免烘固化剂 |
3% |
1008免烘固化剂 |
3% |
五、操作流程:
1)印花工艺:网纱80-100目印花→印2-3次2刀→烘干、干燥→热处理或热压(130-140℃,8-12秒)
2)由于面料多种多样,在印花之前需要先行测试。在有涂层的布料上印花,需要测试布料涂层跟PU体系的粘结强度.。未确定情况使用或操作不当引起的质量问题本公司概不负责 。
Otherdetailedinformation:
Brand |
Conghui |
Model |
230 |
Color |
|
Colorstrength |
100% |
Singlenetweight |
5KG |
substrate |
|
一.Substrates:
Swimsuithighstretchcloth,Lycraanddenim.
二.Appearancecompositionandspecification:
Appearanceandcomposition:whiteviscousbody,polyurethanepolymer.
Brinellviscosity:120000-140000CPS
PHvalue:7.0±0.5
Solidcontent:45%±1
三.Features
Highstretch,highcoveringpower,goodfastnessandresistanttowash,easytothroughscreen,highadhesion,softhandfeel,resistanttohightemperaturesteamingandyellowing.Theshelflifeis12monthsatroomtemperature(avoidover45℃hightemperatureorbelow-25℃lowtemperature.)Folding resistance at low temperature,over flashing free,high adhesion.(two-component)
PU230A high elastic waterbased ink white(two-component):good covering power,good wash fastness,high tensile strength,soft hand feel,easy to print,high adhesion,resistance to yellowing,ultra-low temperature folding ,excellent performance of non-after tack,anti-freeze.It has a strong combination between transfer printing and color printing ,meanwhile excellent washable performance.
PU230B high elastic waterbased ink clear(two-component):High transparency,good color yield rate,good wash fastness,high tensile strength,soft hand feel,easy to print,high adhesion,resistance to yellowing,ultra-low temperature folding,excellent performance of non-after tack,anti-freeze.
Dark |
Lightcolor |
||
HighstretchWater-basedwhite |
20percent |
HighstretchWater-basedwhite |
40percent |
HighstretchWater-basedclear |
80percent |
HighstretchWater-basedclear |
60percent |
Paste |
3-5percent |
Paste |
3-5percent |
1008avoiddryingcuringagent |
3percent |
1008avoiddryingcuringagent |
3percent |
五.Operationprocess
1.printingtechnology:80-100meshscreen printing—printing 2-3 times—drying—heat treatment or heat pressure(130-140℃,8-12seconds)
2.Duetovariousfabrics,makingtestsbeforeprinting.printingonthecoatedcloths,shouldhaveatestaboutadhesionstrengthbetweencoatedfabricsandPUsystem.Usingoroperatinginuncertaincondition,ourcompanyisnotresponsibleforqualityproblem.