墙体彩绘的施工流程有哪些呢?
墙体彩绘机的施工流程有哪些呢?是很多刚接触不久的朋友们最关注的，因为不了解，所以想要了解更多关于墙体彩绘机方面的信息，下面就有小编来为大家简单的介绍一下墙体彩绘机的施工流程。


墙体彩绘的施工流程有哪些呢?




　　墙体彩绘施工流程：


　　1、选图案：根据个人喜好和装修风格选定基本图案。


　　2、配涂料：对照图案效果购买颜料,如购买时对乳胶漆调色效果把握不住,不要急于在涂料店里做决定,可把色板或涂料样品带回家,分别在自然光线和夜晚灯光下观察涂料颜色。高光涂料会使房间看起来更明亮,但也易突出墙面缺点,如果墙面不太平整,建议选用平光涂料。涂料千万不可过稀,否则容易在墙面留下流痕。丙烯颜料可按需要调色,谨慎下笔。


　　3、准备上色：首先,在要涂鸦的墙壁前铺满报纸,以免弄脏地面。手绘色彩单纯的图案时,先在薄而吸水性好的纸上画好轮廓,然后将其剪下来,放到墙面相应位置,用拓印的方式着色。如果怕把墙面弄坏,方便的方法是拿喷绘不干胶,喷完后把画面刻下来,用不干胶贴在墙上。丙烯颜料在作画时,如果发现有错误,可以拿湿抹布擦掉重画,但乳胶漆不能采用此办法。


　　4、维护：画完后要通风,待墙面干透后,才可触碰。虽然丙烯颜料干后防水防划,但也不可用水用力擦洗。
What is the construction process of wall painting?
What is the construction process of the wall painting machine? It is the most concerned by many friends who have just contacted. Because they don't know about it, they want to know more about the wall painting machine. Here is a brief introduction to the construction process of the wall painting machine.
What is the construction process of wall painting?
Wall painting construction process:
1. Select pattern: select basic pattern according to personal preference and decoration style.
2. Paint matching: purchase the paint according to the pattern effect. If you can't grasp the color matching effect of emulsion paint when you buy it, don't rush to make a decision in the paint shop. You can take the color plate or paint sample home and observe the color of the paint under the natural light and night light respectively. High gloss paint will make the room look brighter, but it is also easy to highlight the shortcomings of the wall. If the wall is not smooth, it is recommended to use flat paint. Paint must not be too thin, or easy to leave flow marks on the wall. Acrylic pigment can be toned according to the needs, write carefully.
3. Prepare for coloring: first of all, spread newspapers in front of the walls to be graffiti to avoid soiling the ground. When painting simple color patterns by hand, first draw a good outline on thin and absorbent paper, then cut it off, put it on the corresponding position of the wall, and use rubbing method to color. If you are afraid of damaging the wall, the convenient way is to take the spray paint adhesive, after spraying, carve out the picture, and stick the adhesive on the wall. Acrylic paint in the painting, if there is a mistake, you can take a wet cloth to wipe off the redraw, but latex paint can not use this method.
4. Maintenance: ventilate after painting, and touch after the wall is dry. Although the acrylic pigment is waterproof and scratch proof after drying, it should not be scrubbed with water.